Confort Smartline

Performant and Elegant

Confort Smartline is an optimised, high performing, thermally insulated
sliding door with a slim sightline. The system combines this highly
attractive aesthetic line with remarkable energy efficiency. The sliding
door belongs to an entirely new generation of sliding systems thanks to
technical innovation and well-considered design.

Confort Smartline description

Advanced Energy saving on a modular basis

Confort Smartline profiles are coupled with 50 mm glass fibre reinforced polyamide strips, which reduce thermal conduction. These polyamide strips are specially designed in order to improve the thermal values, without adding extra internal inserts in the profiles. The bigger cavities between profiles are insulated with customised PE strips. The result is that Confort Smartline achieves a high thermal performance level and improved total insulation, leading to lower total energy consumption and a reduced environmental impact.

The system accommodates glazing up to 53 mm

Thermal modularity in 3 levels

Confort Smartline Basic

  • Uf up to 1,88 W/m2K for monorail
  • Uf up to 2,64 W/m2K for 2-rail slide version

   

Confort Smartline SI

  • Uf up to 1,75 W/m2K for monorail
  • Uf up to 2,59 W/m2K for 2-rail slide version
  • Improved thermal glazing gaskets
  • PE inserts in vent profile (Foam-power®)

   

Confort Smartline SHI

  • Uf up to 1,40 W/m2K for monorail
  • Uf up to 2,48 W/m2K for 2-rail slide version
  • Improved thermal glazing gaskets
  • PE inserts in vent profile (Foam-power®)
  • PE insert thermal improved glazing unit

A variety of versions

Confort Smartline monorail

  • Slide and lift-slide version
  • Larger glazed surfaces
  • No additional profile for central sealing gasket
  • Sliding vent on the inside or on the outside

 

   

Confort Smartline 2-rail 

  • Equal sized profiles for slide and lift-slide
  • Optimized fabrication by use of clip connections, straight cuts, special end-pieces to a large extent
  • Total preparation in workshop with minimum of operations left to do on-site
  • Multipoint locking
  • Wide range of finishing possibilities

   

Confort Smartline Straight Cut / 2-rail

  • Easy fabrication with straight cut profiles
  • Profile connection with screws
  • Preformed gaskets to seal profile joints

   

Confort 160 Straight Cut / 3-rail

  •  3 vents beside each other
  • 2/3 of the window can be opened
  • Same insulation pieces and sealing profiles

Confort Smartline Fix-Sliding-Fix solution

  •  Slide and lift-slide version
  • Larger glazed surfaces
  • No additional profile on the lockside, reducing the sightline

 

Confort Smartline bi-part solution
  • Fully thermally insulated
  • Standard locking plate
  • Click system when installing
  • Available for slide and lift-slide versions
Confort Smartline interlock solutions
  • Standard with 92 mm
  • Slim interlock of 36 mm
  • Available for slide and lift-slide versions

   

Performances

Thermal insulation

Uf up to 1,40 W/m²K (SHI - 1-rail)

Thermal insulation

Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels

Norm

EN ISO 10077-2

Thermal insulation

Uf up to 2,46 W/m²K (SHI - 2-rail)

Thermal insulation

Results of the calculation of the thermal transmittance of frame profiles and of the linear thermal transmittance of their junction with glazing or opaque panels

Norm

EN ISO 10077-2

Air Tightness

4 (600 Pa) lift-slide version

Air Tightness

Air tightness refers to the amount of air that will travel through a window or door system in its closed position, both under positive and negative pressure.

Norm

EN 12207

Water Tightness

E9 (900 Pa) lift-slide version

Water Tightness

The test applies specified amounts of water spray to the outside face of the window (combination) while incrementally increasing the air pressure. The result defines the test pressure, time and position of any water infiltration.

Norm

EN 12208

Wind Resistance

C3 - 1200 Pa, sec. 1800 Pa (lift-slide version)

Wind Resistance

The test applies a series of positive and negative test air pressures. Measurements and inspections are made to asses relative frontal deflection and resistance to damage from wind loads.

Norm

EN 12210

Characteristics

Dimensions

Min. sightline monorail (fixed glazing)

53 mm

Min.  sightline monorail (fixed & sliding part)

132 mm

Min. sightline monorail (fixed & lift-slide part)

127 mm

Min. sightline 2-rail (fixed & sliding part)

138 mm

Min. sightline 2-rail (fixed & lift-slide version)

133 mm

Min. sightline 2-rail (straight cut, slide version)

122 mm

Min. sightline 2-rail (straight cut, lift-slide version)

127 mm

Sightline interlock

92 mm

Profile depth 2-rail

160 mm

Profile depth 3-rail

250 mm

Profile depth vent

70 mm

Max dimensions vent - hardware related* - (W x H)

*weight limit = 250 kg

3100 x 2800 mm
 
Glazing

Infill thickness sliding parts 2- and 3-rail

23 - 53 mm
Glazing method

dry glazed with EPDM gaskets or silicon

 
Performances
Thermal break

50 mm PA 6.6 GF25 (30 or 35 mm in the vent)

Thermal insulation SHI version 1-rail

Uf up to 1,40 W/m²K (EN ISO 10077-2)

Thermal insulation SHI 2-rail

Uf up to 2,48 W/m²K (EN ISO 10077-2)

Thermal insulation SI version 1-rail

Uf up to 1,75 W/m²K (EN ISO 1007-2)

Thermal insulation SI version 2-rail

Uf up to 2,59 W/m²K (EN ISO 10077-2)

Thermal insulation Basic version 1-rail

Uf up to 1,88 W/m²K (EN ISO 10077-2)

Thermal insulation Basic version 2-rail

Uf up to 2,64 W/m²K (EN ISO 10077-2)

Air tightness lift-slide version

4 - 600 Pa (EN 12207)

Water tightness lift-slide version

E900 - 900 Pa (EN 12208)

Wind resistance lift-slide version

C3 - 1200 Pa, security 1800 Pa (EN 12210)

Applications

1-rail frame, 1 sliding vent

1-rail frame, 1 sliding vent

1-rail frame, 2 sliding vents

1-rail frame, 2 sliding vents

2-rail frame, 1 sliding vent, 1 fixed vent

2-rail frame, 1 sliding vent, 1 fixed vent

2-rail frame, 2 sliding vents

2-rail frame, 3 sliding vents

2-rail frame, 2 sliding vents, 1 fixed vent

2-rail frame, 4 sliding vents

2-rail frame, 2 sliding vents, 2 fixed vents

2-rail frame, 1 sliding vent, 2 fixed vents

3-rail frame, 3 sliding vents

3-rail frame, 6 sliding vents

1-rail lift-slide

1-rail lift-slide

1-rail, two lift-sliding vents

1-rail frame, 2 fixed elements, 2 lift-slide vents

2-rail frame, 1 fixed vent, 1 lift-slide vent

2-rail frame, 1 fixed vent, 1 lift-slide vent

2-rail frame, 2 lift-slide vents

2-rail frame, 3 lift-slide vents

2-rail frame, 1 fixed vent, 2 lift-slide vents

2-rail frame, 2 fixed vents, 1 lift-slide vent

2-rail frame, 2 fixed vents, 1 lift-slide vent

2-rail frame, 4 lift-slide vents

2-rail frame, 2 fixed vents, 2 lift-slide vents

3-rail frame, 3 lift-slide vents

3-rail frame, 2 lift-slide vents, 1 fixed vent

3-rail frame, 2 lift-slide vents, 1 fixed vent

3-rail frame, 6 lift-slide vents

3-rail frame, 6 lift-slide vents

3-rail frame, 4 lift-slide vents, 2 fixed vents

3-rail frame, 4 lift-slide vents, 2 fixed vents

Building Information Models

Sapa BIMselector

Building Information Modeling (BIM) is a digital representation of physical and functional characteristics of our aluminium window and door systems. We have created many different applications of our systems and offer them - free of charge - for download on the Sapa BIMselector.

Go to Sapa BIMselector

Documentation

PB_ConfortSmartline_BRen_032016.pdf PB_ConfortSmartline_BRen_032016.pdf
PB_ConfortSmartline_BRen_032016.pdf
Download 2.5 MB

Product overview

Confort Smartline is an optimised, high performing, thermally insulated
sliding door with a slim sightline. The system combines this highly
attractive aesthetic line with remarkable energy efficiency. The sliding
door belongs to an entirely new generation of sliding systems thanks to
technical innovation and well-considered design.

SAPA BUILDING SYSTEMS -
Please choose your language